Consumer Defined Control Features - Frigidaire GLEB30T9DS Control Manual

Consumer Defined Control Features

Setting Temperature Display — Fahrenheit or Celsius
The BROIL Broil and FLEX CLEAN
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
(figure 1) and hold for 7 seconds; Wait untill "F" or "C" appears.
If "F" appears, the display is set to show temperatures in
Fahrenheit (Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
2. Press to switch between Fahrenheit or Celsius display
Clean
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
Clear
START
3. Press or
/Off
pads control the Fahrenheit or Celsius temperature display modes. The oven
Clean
or wait 5 seconds to accept the change.
PRESS
Broil
Broil
for 7seconds
Clean
START
or
5
DISPLAY
BROIL
Figure 1
Figure 2
Clear
/Off
Figure 3