Consumer Defined Control - Frigidaire GLEB30T9DS Control Manual

Consumer Defined Control

Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include
the Oven Lockout, Temperature Display and Silent Control Operation features
Setting Oven Lockout Feature
Clear
The pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents
/Off
the Oven from being turned on. It does not disable the interior oven lights.
INSTRUCTIONS
To activate the Oven Lockout feature
Clear
1. Press and hold
/Off
2. After 3 seconds "Off" will appear in the display and a beep will
sound. Once the oven door is locked "LOCK" will appear in the
display (Figure 1).
To reactivate normal oven operation:
Clear
1. Press and hold
/Off
disappear from the display and "LOCK" will stay until the oven door
has completely unlocked (Figure 2).
2. The wall oven is again fully operational (Figure 3).
Setting Silent Control Operation
Start
The START TIME and CLEAN
time
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be
programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation press and
Start
hold for 7 seconds. "On bEEp On" will appear in the display
time
(Figure 4).
2. Press to switch between normal sound operation and silent
Clean
operation mode. The display will show either "On bEEp On"
(Figure 4) or "Off bEEp Off" (Figure 5).
If "On bEEp On" appears (Figure 4), the control will operate with
normal sounds and beeps. If "Off bEEp Off" appears (Figure 5),
the control is in the silent operation mode.
START
3. Press or wait 5 seconds to accept the change.
for 3 seconds (Figure 1).
for 3 seconds. A beep will sound. "Off" will
pads control the Silent Control operation feature. The Silent Control operation
Clean
PRESS
Clear
for 3 seconds
/Off
Clear
for 3 seconds
/Off
PRESS
Start
time
for 7 seconds
Clean
START
4
DISPLAY
LOCK LOCK LOCK
Figure 1
LOCK LOCK LOCK
Figure 2
Figure 3
DISPLAY
Figure 4
Figure 5