Setting Oven Controls
Setting the Keep Warm Feature
Keep
The Keep Warm
pad turns ON the Keep Warm feature and will maintain an oven temperature of 170°F (77°C). The Keep
Warm
Warm feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the Keep
Warm feature will shut the oven OFF. The Keep Warm feature may be used without any other cooking operations or can be
used after cooking has finished using BAKE, CONVECTION BAKE or CONVECTION ROAST.
The Keep Warm feature may be used with TIMED BAKE if you wish to have the Keep Warm feature turn ON automatically
when cooking has finished. The Timed Bake features require you to set start time and the amount of cooking time. With this
information the control can calculate the time when cooking will complete and can then start the Keep Warm feature
automatically.
INSTRUCTIONS
To set Keep Warm:
1. Arrange interior oven racks and place food in oven.
Keep
2. Press
. "- - -°" will appear in the display (Figure 1).
Warm
Note: If no pad is touched within 5 seconds the request to turn ON
Keep Warm feature will be cancelled.
START
3. Press
. "HLd" and "
4. To turn the Keep Warm OFF at any time press
Note: The Keep Warm feature will automatically turn OFF after 3
hours.
To set Keep Warm to turn ON automatically:
1. Arrange interior oven racks and place food in oven. Set the oven
properly for Timed Bake or Delayed Timed Bake.
Keep
2. Press
. (Figure 3)
Warm
START
3. Press
. The "HLd" will appear in the display after Timed
Bake has finished (See Figure 4).
4. To turn the Keep Warm feature OFF at any time press
Note: The Keep Warm feature will automatically turn OFF after 3
hours.
Clear
Pressing
at any time will stop all oven baking operations.
/Off
ON
" will appear in the display (Figure 2).
Clear
/Off
PRESS
.
Clear
.
/Off
12
DISPLAY
Figure 1
Keep
Warm
START
ON
Figure 2
Clear
/Off
Keep
Warm
PRE-
PRE-
TIMED
BAKE
BAKE
OVEN
ON
Figure 3
START
Clear
/Off
ON
Figure 4
Clear
/Off
TIME
1
Need help?
Do you have a question about the GLEB30T9DS and is the answer not in the manual?