Setting Wall Oven - Frigidaire GLEB30M9FSA Use & Care Manual

Consumer Defined Controls
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These
include the Oven Lockout, Silent Control Operation and Temperature Display features.
Setting Oven Lockout Feature
Clear
The pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents
/Off
the Oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.
INSTRUCTIONS
To activate the Oven Lockout feature
Clear
1. Press and hold
/Off
2. After 3 seconds "LOC" will appear, a beep will sound and "DOOR
LOCKED" will flash in the display. Once the oven door is locked
the "DOOR LOCKED" indicator will stop flashing and remain on
along with the "LOC".
To reactivate normal oven operation:
Clear
1. Press and hold
/Off
disepear and "DOOR LOCKED" will flash in the display until the
oven door has completely unlocked (figure 2).
2. The wall oven is again fully operational.
Setting Silent Control Operation
Start
The START TIME and CLEAN
time
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can
be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation press and
Start
hold . "0:00" will appear and "DELAY" will flash in the display
time
(Figure 3). After 7 seconds ":SP" will appear in the display (Figure 4).
2. Press to switch between normal sound operation and silent
Clean
operation mode. The display will show either ":SP" (Figure 4) or
":--" (Figure 5).
If ":SP" appears (Figure 4), the control will operate with normal
sounds and beeps. If ":- -" appears (Figure 5), the control is in the
silent operation mode.
START
3. Press to accept the change or press
change.
Setting Wall Oven Controls
for 3 seconds (Figure 1).
for 3 seconds. A beep will sound. "LOC" will
pads control the Silent Control operation feature. The Silent Control operation
Clean
Clear
/Off
Clear
/Off
Clear
to reject the
/Off
20
PRESS
for 3 seconds
for 3 seconds
PRESS
Start
time
Clean
Clear
START
or
/Off
DISPLAY
Figure 1
Figure 2
DISPLAY
Figure 3
Figure 4
Figure 5