Table of Contents
Advertisement
15 – Frequently Asked Questions
If you want to pair more phones to the GPS receiver:
The GPS receiver retains up to 8 phones in its history list. Pairing a ninth phone will erase the
eighth phone. To reset the history list to zero: press and hold the power button for longer than 10
seconds. Reset is indicated by 2 flashes of the Bluetooth status light.
If you need to pair a new GPS receiver to MOTONAV:
Be sure to power cycle your phone first. Turn your phone off, and then turn it back on. Turn on
your new GPS receiver and follow the directions for Connecting Via Bluetooth in section 8 –
Installation and Start Up.
If you need to move your UPH after it has been stuck to the dash:
You will have to very gently pry off the UPH base from the dash. Clean up any residue with
alcohol. Most auto parts stores carry Molding and Trim Tape that can be used as an adhesive.
Auto parts stores also carry replacement Velcro tape if your Velcro mount wears out.
All manuals and user guides at all-guides.com
61
Advertisement
Table of Contents
