Advertisement
TECHNICAL SPECIFICATIONS:
Maximum liquid capacity...........................................32 oz.
Working pressure.............................................. 80-150 psi
Minimum pressure....................................................80 psi
Maximum pressure.................................................200 psi
Technical specifications are subject to change without notice.
REPLACEMENT PARTS AVAILABLE
Rebuild Kit (contains part numbers 1-17 excluding part 12)............ M715K
PARTS LIST
No. Description
1.
Pin Stream Nozzle................
2.
Spray Nozzle........................
3.
Head Washer........................
4.
Valve Seat Adaptor...............
5.
Inner Washer.........................
6.
Valve.....................................
7.
Valve Spring..........................
8.
Black Cap.............................
9.
Filler Valve
1
3
5
7
2
4
6
1
WARNING
THE MAXIMUM
PRESSURE
SHOULD NOT
EXCEED 200 PSI.
Qty.
No. Description
1
10. Filler Cap Assembly...........
1
11. Cap Gasket........................
1
12. Cup Body...........................
1
13. Sealing Washer..................
1
14. Guiding Nut.......................
1
15. Cotter Pin...........................
1
16. Trigger.................................
1
17. Trigger Liner........................
1
8
9
10
11
12
14
13
SAFETY GUIDELINES / DEFINITIONS
This instruction manual is intended for your benefit. Please read and follow the safety, installation,
maintenance and troubleshooting steps described within to ensure your safety and satisfaction.
The contents of this instruction manual are based upon the latest product information available at
the time of publication. The manufacturer reserves the right to make product changes at any time
without notice.
WARNING - DISCONNECT SPRAY GUN FROM AIR SOURCE BEFORE MAKING ADJUSTMENTS
WARNING: Read and understand this entire instruction manual before attempting to assemble, install, operate or maintain
this product. Failure to comply with the instructions may result in serious personal injury and/or property damage!
The following signal words are used to emphasize safety warnings that must be followed when using this product:
DANGER: Indicates an imminently hazardous situation
that, if not avoided, WILL result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
that, if not avoided, COULD result in death or serious injury.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
Qty.
accept any interference received, including interference that may cause undesired operation.
1
1
WARNING. READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE
1
OPERATING THIS PRODUCT. FAILURE TO DO SO MAY RESULT IN FIRE, ELECTRICAL SHOCK,
1
PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
1
1
WORKPLACE SECURITY
1
• Keep the area clean and well lit. Cluttered or dark areas can cause accidents.
1
• Do not use power tools in explosive environments, e.g. in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and people away during the use of the tool. Distractions can cause you to lose
control of the tool.
PERSONAL SAFETY
• Be aware of what you are doing and use common sense while using the tool. Do not use a
tool when you are tired or under the influence of drugs, alcohol or medication. A moment of
distraction while using a tool can cause serious personal injury.
• Use safety equipment. Always wear eye protection. Safety equipment such as dust masks,
non-slip safety shoes, helmets or ear protection used in appropriate conditions will reduce
the risk of injury.
• Avoid accidental starting. Make sure that the switch is in the off position before plugging in to
15
power or battery, collect or transport. Carrying tools with your finger on the trigger or plugging
the tool in with the trigger pulled can cause accidents and injury.
16
• Remove any adjusting key before turning the tool on. A key left attached to a rotating part of
the tool may result in personal injury.
• Do not rush. Maintain proper footing and balance at all times. This allows better control of the
tool in unexpected situations.
• Dress appropriately. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away
17
from moving parts. Loose clothing, jewelry or long hair can get caught in moving parts.
CAUTION: Indicates a potentially hazardous situation
that, if not avoided, MAY result in minor or moderate injury.
NOTICE Indicates important information, which if not
followed, MAY cause damage to equipment.
2
Advertisement
