Note on installation The unit is designed for 12V DC, negative ground operation system only Before installing the unit. Make sure your vehicle is connected to DC 12V negative ground electrical system. The negative battery terminal must be disconnected before making connections, which can reduce the damaging the unit due to short circuit.
Page 6
Basic Operation 5. Stop playing tracks During playback, press ”STOP” on remote button to stop the playback, LCD will show ”STOP” to return to normal play mode, press ”PLAY”.
Page 7
Basic Operation GAS RC Control App GAS RC is an application that connects and controls compatible GAS car receivers via Bluetooth like a wireless remote control. Key features includes Remote Control Function, Receiver Setting and Display Receiver Information. CAUTION! Do not operate any functions that takes your attention away from safe driving.
Basic Operation General Power requirements : 12V DC Load impedance : 4ohm : +8 dB(bass 1OHz,Treble 1OKHz] Tone controls Audio section : 2Vrms Maximum output level : 2O to 2OKhz Frequency response : 85dB Signal to-noise radio : 8OdB Separation FM Tuner section Tuning range : 87...
Page 10
Safety notes Do not modify or open the device. The car audio system was manufactured according to recommended and established safety guidelines Use as directed in a state of the art facility.Even so,dangers may This car audio system is intended for installation and occur if you do not observe the safety notes in these operation in a vehicle with 12V vehicle system voltage instrucions.
Need help?
Do you have a question about the GMA151BT and is the answer not in the manual?
Questions and answers