Table of Contents
Advertisement
PRODUCT ASSEMBLY
Before first use, clean all parts and accessories (see "Care and Cleaning" section).
ASSEMBLING THE FOOD GRINDER ATTACHMENT
1
Sharp Side
Insert the Grind Screw into the Main
Housing securely. Place the Blade over the
end of the Grind Screw.
The Blade should fit entirely inside the
housing. If it doesn't, pull it off, turn it over,
and place it again.
ASSEMBLING THE SAUSAGE STUFFER ATTACHMENT
1
Insert the Grind Screw into the Main
Housing. Then insert the Sausage Stuffer
Plate over the end of the Grind Screw,
matching the notch of the plate with the
tab on the bottom of the Main Housing.
W11457012A_01_EN.indd 5
W11457012A_01_EN.indd 5
2
Tab
Notch
Place the desired Grinding Plate over the
Blade, matching the notch of the plate
with the tab on the bottom of the Main
Housing.
Place the Collar on the Main Housing,
turning clockwise by hand until secured but
not tightened.
2
Insert the desired sausage stuffer tube
(large or small) through the Collar. Then,
place the Collar and tube assembly on the
Main Housing, turning the ring by hand
until secured but not tightened.
5
10/29/2020 7:17:05 PM
10/29/2020 7:17:05 PM
Advertisement
Table of Contents
