Advertisement
LWACC169-PortaWash Manual 2020.qxp_Layout 1 18/03/2020 14:56 Page 3
Portawash Parts Identification
1
2
3
INFORMATION
Preparation and usage of
washing machine:
1. Remove all packaging and ensure air
ventilation point is not blocked.
2. Make sure the water inlet tube is securely fastened to the washing machine & tap before
any use.
3. Place clothes in Washer tub (3) - (taking care not to overload, maximum load 3.0kg
including water required).
4. Add hot water from tap to around
other suitable water carrier. Please note-DO NOT use boiling water from a kettle), add
powder in an appropriate amount for the wash required.
5. Turn the Drain selector (4) to required wash (Gentle Wash: For light laundry & soft
material or normal wash: For all type of materials and laundry). Then turn the
Wash timer (5) to required amount (between 3 & 15 mins), wash will begin automatically.
6. When the wash cycle is finished ensure the drainage tube is in a suitable place to drain
the water (i.e. floor outside or a sink), turn the Drain selector (4) to "Drain", also the
clothing cover can be used to press down gently on the clothes to remove excess water,
additionally, if appropriate for the washing load, wring any further excess water before
placing in the Spinning tub (8).
7. If appropriate for the clothing place the washed load into the Spinning tub (8), then turn
the Spin timer (6) to required amount (between 1 & 5 mins).
4
5
6
7
8
3
/
full (alternatively this can be added from a bucket or
4
Water Inlet
1
Washer Cover
2
Washer Tub
3
Drain Selector
4
9
Wash Timer
5
Spin Timer
6
Spin Cover
7
Spin Tub
8
Carrying Handle
9
Water Inlet Hose
Clothing Cover
Advertisement
