stellar labs 50-20810 Owner's Manual

2 x 160 watts into 4 ohms/ 2 x 120 watts into 6 ohms
Power Output (10% THD)
2 x 100 watts into 8 ohms
Amplifier Efficiency >90%
Minimum THD <1%
Signal-to-noise Ratio >90 dB
20-20,000 Hz
Frequency Response
Bluetooth Compatibility Bluetooth v4.0, up to 20 meters/ Distance will vary
DC Power Input Jack 2.5 mm x 5.5 mm
Power Requirements 18 to 36 VDC, 4.5A
Included Power Supply 110-240 VAC input, 36 VDC, 4.5A output
4.5" W x
Dimensions
(114.3mm W x
CAUTION
CAUTION
For indoor use only. Your 50-20810 should not be exposed to any outdoor elements including dust, water,
moisture, humidity, or temperatures outside normal living conditions. There are no user serviceable parts inside
your amplifier, therefore do not open your 50-20810 or it will void your warranty. For optimum life of your
50-20810 place it in a location that is open and where air can fully circulate. Use a clean cloth to dust your
50-20810. Your amplifier comes with a compatible power supply. If an inappropriate power supply is used and
the unit is damaged the warranty will be voided.
QUESTIONS / PROBLEMS
QUESTIONS / PROBLEMS
Consult your Owner's Manual for set-up and operation. Should you have questions or issues not found in the
manual please contact your place of purchase.
3
1.25" H x 7" D
31.8mm H x 177.8mm D)
50-20810
OWNER'S MANUAL
200 WATT CLASS D
BLUETOOTH aptX
STEREO AMPLIFIER