Replace A Cru; Base Cover Assembly - Lenovo ThinkPad X1 User Manual

Hide thumbs Also See for ThinkPad X1:
Table of Contents

Advertisement

5. Clear the Turn on fast startup check box, and then click Save changes.
To disable the built-in battery:
1. Restart your computer. When the logo screen is displayed, immediately press F1 to enter the UEFI BIOS
menu.
2. Select Config ➙ Power. The Power submenu is displayed.
3. Select Disable Built-in Battery and press Enter.
4. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off
automatically. Wait three to five minutes to let the computer cool.

Replace a CRU

Follow the replacement procedure to replace a CRU.

Base cover assembly

Prerequisite
Before you start, read
Generic Safety and Compliance Notices
Note: Do not remove the base cover assembly when your computer is connected to ac power. Otherwise,
there might be a risk of short circuits.
For access, do the following:
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 37.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn over the computer.
Removal procedure
38
X1 Carbon Gen 9 and X1 Yoga Gen 6 User Guide
and print the following instructions.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkpad x1 carbon gen 9Thinkpad x1 yoga gen 6

Table of Contents