6.1.7 Iso; Rohs; Other Approvals - Siemens SIMATIC NET Installation Manual

Certification
6.1.7 ISO
Note
This equipment has no right to be protected from harmful interference and may not
cause interference in duly authorized systems.
6.1.7 ISO
This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
•
6.1.8

RoHS

This device is declared by Siemens AG to meet the requirements of the following
RoHS (Restriction of Hazardous Substances) directives for the restricted use of certain
hazardous substances in electrical and electronic equipment:
•
A copy of the Material Declaration is available online at
support.industry.siemens.com/cs/ww/en/view/109738831.
6.1.9

Other Approvals

This device meets the requirements of the following additional standards:
•
•
•
52
ISO 9001:2015
Quality management systems – Requirements
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic
Information Products
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications
Networking Devices in Electric Power Substations
IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
IEC 61850-3
Communication Networks and Systems in Substations – Part 3: General
Requirements
https://
RUGGEDCOM RX1511
Installation Manual, 04/2021, C79000-G8976-1056-20