Epson EB-805F Installation Manual page 91

Appendix
List of Safety Symbols
The following table lists the meaning of the safety symbols labeled on the equipment.
Symbol mark Approved stand-
ards
IEC60417 Power On
No.5007 To indicate connection to the mains.
IEC60417 Power Off
No.5008 To indicate disconnection from the mains.
IEC60417 Standby
No.5009 To identify the switch or switch position by means of which part
of the equipment is switched on in order to bring it into the
standby condition.
ISO7000 Caution
No.0434B To identify general caution when using the product.
IEC3864-B3.1
IEC60417 Caution, hot surface
No.5041 To indicate that the marked item can be hot and should not be
touched without taking care.
IEC60417 Caution, risk of electric shock
No.6042 To identify equipment that presents a risk of electric shock.
ISO3864-B3.6
IEC60417 For indoor use only
No.5957 To identify electrical equipment designed primarily for indoor
use.
IEC60417 Polarity of d.c. power connector
No.5926 To identify the positive and negative connections (the polarity)
on a piece of equipment to which a d.c. power supply may be
---
connected.
IEC60417 Battery, general
No.5001B On battery powered equipment. To identify a device for instance
a cover for the battery compartment, or the connector terminals.
IEC60417 Positioning of battery
No.5002 To identify the battery holder itself and to identify the positioning
of the batteries inside the battery holder.
---
IEC60417 Protective earth
No.5019 To identify any terminal which is intended for connection to an
external conductor for protection against electric shock in case
of a fault, or the terminal of a protective earth electrode.
IEC60417 Earth
No.5017
To identify an earth (ground) terminal in cases where the
not explicitly required.
Meaning
90
is