Installing the Wall Mount
Quick Corner
• Adjusting using the Blanking feature ( p.64)
This feature hides part of the image so that it does not extend beyond the edges of the screen.
c
•
Images are not stable immediately after turning on the projector. After starting projection, wait for at
least 30 minutes before adjusting the image.
•
When setting up multiple projectors using the batch setup function, perform the batch setup before
adjusting the projected image.
•
We recommend the mechanical position adjustment of the setting plate to adjust the image when
you want to maintain image quality.
Preparations before adjusting
a
Press the [
] button on the remote control or the control panel to turn on the projector
b
Open the projector's front cover, and then perform approximate focus adjustment using
the focus lever
Arc Correction
53
Point Correction