Powercom Line-Interactive 1025AP User Manual page 11

Frequency(Battery-Mode)
Transfer Time
Protection
Full Protection
Tele Communication
Battery
Type
Quantity
Typical Recharge Time
Management & Communication
Indicator
Communication Port
Physical
Dimensions (WxDxH) (mm)
Weight (kgs)
Shipping Dimensions (mm)
Shipping Weight (kgs)
Alarm
Overload / Fault
Battery Mode
Low Battery
Environment
Operating Humidity
Audible Noise
* Specifications are subject to change without further notice.
* Specifications are for reference; actual information should be based on the real product.
© All rights reserved. All trademarks are property of their respective owners.
12V 7.2Ah
2
130 x 382 x 200
13.5 13.5
253 x 488 x 321
15.5 15.5
0-90 % RH at 0-40°C (Non-condensing)
10
50 Hz / 60 Hz ± 0.5 Hz
2 - 4 ms (Typical)
Overload, Surge, Short Circuit
RJ11 / RJ45 : AP model
6-8 hr to 90%
LED Control Panel : IMP model
LCD Control Panel : IMD model
USB B type
16
18
Continuous Beeping
Beep every 2 seconds
Beep every 0.5 second
Less than 40 dB
12V 9Ah 12V 9Ah
2 3
130 x 440 x 200
16.6 22
253 x 556 x 321
18.6 24