Playing Karaoke - Sharp CD-BK147V Operation Manual

Playing karaoke

CD-BK147V
You can enjoy karaoke to video CDs, CDs and cassettes by connecting a separately
available microphone to this unit.
E-29 ENGLISH
1
Set the MIC LEVEL control to MIN to protect the speakers from
shock noise and to avoid disturbing noises.
2
Connect the microphone to the MIC socket.
z Use a microphone with a 6.3 mm (1/4") plug, an impedance of 600 ohms.
z Use a standard plug adaptor when using a microphone with a 3.5 mm (1/8")
diameter plug.
3
Press the ON/STAND-BY button to turn the power on.
4
Press the CD/VIDEO CD or TAPE (1
source and play it.
If you wish to record, start recording in the TAPE 2 compartment. (Refer to pages
30 - 31 for details.)
5
Adjust the volume of the audio source using the VOLUME buttons.
6
Turn the MIC LEVEL control towards MAX to increase the micro-
phone volume and towards MIN to decrease it.
Notes:
z When you sing too loud through the microphone, your voice may be distorted
depending on the devices connected. If this happens, lower the microphone vol-
ume.
z If an extremely sensitive microphone is used, howling may be generated.
z Unidirectional microphone is more appropriate for vocal use.
If squealing occurs:
z Reduce the microphone volume.
z Change the direction of the microphone.
z Reduce the volume of the main unit.
z Move the microphone away from the speakers.
Caution:
z When not using the microphone, remove it from the MIC socket.
z When connecting or disconnecting the microphone, set the MIC LEVEL control to
MIN.
01/8/29 CD-BK147V(X)E3.fm
2) button to select the audio