Table of Contents
Advertisement
AUTOMATIC FAULT WARNINGS AND WHAT TO DO
TROUBLE
CODE
F5
F3
Inability to discharge water
F2
F8
F1
FE
F7
F9
F6
10. PRACTICAL INFORMATION
1. When the machine isn't in operation:
•
Disconnect the plug and close the tap.
•
Leave the door slightly open to prevent odour formation.
2. Select the dry option to remove water droplets.
3. Place dishes in the machine properly to achieve the best energy consumption, washing
and drying performance. Please see the programme and consumption table for more
information.
4. Rinse dirty dishes before placing them in the dishwasher.
5. Only use the Prewash programme when necessary.
6. Do not place the machine near a refrigerator because it will reach high temperatures.
7. If the machine is located in an area that is at risk of freezing, close the tap, disconnect
the inlet hose from the tap and drain the water inside the hose and the machine
completely.
POSSIBLE FAULT
Insufficient water
Continuous water input
Heater error
Overflow
Faulty electronic card
Overheating
Divisor position error
Faulty heater sensor
Make sure the water inlet tap is open and water is flowing
Separate the inlet hose from the tap and clean the filter of
Contact for service if the error continues.
Close the tap and contact for service.
Water discharge hose and filters may be clogged.
Cancel the program.
If the error continues, contact for service.
Contact for service.
Unplug the machine and close the tap.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
EN - 24
WHAT TO DO
the hose.
Advertisement
Table of Contents
