Table of Contents
Advertisement
4. BEFORE USING
THE APPLIANCE
4.1. Preparing your
Dishwasher for first use
•
Check whether the electricity and supply
water specifications match the values
indicated in the installation instructions
for the machine.
•
Remove all packaging materials inside
the machine.
•
Set the water softener level.
•
Fill the rinse aid compartment.
4.2. Fill the salt (IF AVAILABLE)
To fill with softener salt, open the salt
compartment cap by turning it counter
clockwise. (1) (2) At first use, fill the
compartment with 1 kg salt and water (3)
until it is almost overflowing. If available,
using the funnel (4) provided will make
filling easier. Replace the cap and close it.
After every 20th-30th wash, add salt into
your machine until it fills up (approx. 1 kg).
1
3
Fill the salt compartment with water the
first time you fill the salt compartment
only.
Use softener salt specifically produced for
use in dishwashers.
When you start your dishwasher, the salt
compartment is filled with water, therefore
put the softener salt in prior to starting your
machine.
If the softener salt has overflowed and you
do not start the machine immediately, run
a short washing program to protect your
2
4
machine against corrosion.
EN - 9
Advertisement
Table of Contents
