Killtag - Siemens SIMATIC RF310M Function Manual

3.4.19

KillTag

KillTag(tagID : string, password :string) : void
Parameters
● tagID
● Password
Return value(s)
None.
Exceptions
RfReaderApiException
Note
Kills a tag with the given ID (i.e., the tag can no longer be used).
Limitations
This function is only valid when the protocol type is set to EPCC1GEN2.
Invoking this function while another protocol is set , e.g. ISO18000-6B, will result in an
exception.
Version information
Supported in RFID Reader Interface: since V1.0
Mobile Readers
Function Manual, 12/2010, J31069-D0198-U001-A2-7618
The ID of a tag which is to be killed, given as a plain hexadecimal encoded string.
An access password if needed. If none needed use an empty string.
A password is a hexadecimal encoded string of up to eight characters.
Error while communicating with the reader service.
Check the Error member for more information.
RFID Reader Interface Reference
3.4 IRfReaderApi
61