Setchannellist - Siemens SIMATIC RF310M Function Manual
Mobile readers
Hide thumbs
Also See for SIMATIC RF310M:
- Operating instructions manual (76 pages) ,
- Operating instructions manual (114 pages) ,
- Function manual (76 pages)
Table of Contents
Advertisement
RFID Reader Interface Reference
3.4 IRfReaderApi
Exceptions
RfReaderApiException
Note
The modulation scheme defines the data exchange rate between reader and tag. The
possible modulation scheme depends on the used radio profile ETSI or FCC.
Valid ranges for the RF680M are:
FCC :
2 = DSB-ASK 40kHz- FM0 40kHz
4 = DSB-ASK 160kHz- FM0 400kHz
6 = PR-ASK
8 = PR-ASK
ETSI:
2 = DSB-ASK 40kHz- FM0 40kHz
5 = DSB-ASK
6 = PR-ASK
7 = PR-ASK
Version information
Supported in RFID Reader Interface since V1.3
3.4.11
SetChannelList
SetChannelList (channelList: string) : void
Parameters
Return value(s)
None
Exceptions
RfReaderApiException
50
40kHz - M4 250kHz
40kHz - M2 250kHz
40kHz - M2 160kHz
40kHz - M4 250kHz
40kHz - M4 300kHz
•
channelList
Set used ETSI channels. Coma separated list. Valid channels are 103,106,109,112.
At minimum one channel must be defined.
Error while starting the communication with the reader. Check
the Error member for more information.
Error while communicating with the reader. Check the Error
member for more information.
Function Manual, 12/2010, J31069-D0198-U001-A2-7618
Mobile Readers
Advertisement
Table of Contents
