Table of Contents
Advertisement
Safety
− Do not open the housing; instead, have a qualified
professional perform repairs. To do so, contact the service
address indicated on the warranty card. Liability and warranty
claims are waived in the event of repairs or conversions
performed by the user, improper connection of the device or
incorrect operation.
− Only parts that comply with the original device data may be
used for repairs. Electrical and mechanical parts, which are
essential for providing protection against sources of danger,
are located in this paper shredder.
− Do not operate the paper shredder with an external timer or
separate telecontrol system.
− Make sure that the paper shredder and the power cable or
plug do not come into contact with water or other liquids.
− Do not immerse the paper shredder or the power cable or
power plug in water or other liquids.
− Do not perform any other work (such as cleaning) on the
paper shredder while it is operating.
− Only use an adapter plug or extension cord with protective
contact and connect it to an easily accessible socket so that you
can quickly disconnect the paper shredder from the power
supply in case of a failure.
− Never touch the power plug with damp hands.
− Never pull the power plug out of the socket by the power
cable; instead, always do so by taking hold of the power plug.
− Never use the power cable as a carrying strap.
− Keep the paper shredder, power plug and power cable away
from open flames and hot surfaces.
− Lay the power cable so that it does not pose a tripping hazard.
− Do not kink the power cable and do not lay it over sharp
edges.
10
Advertisement
Table of Contents
