Whirlpool W10836808B User Instructions page 14

Table of Contents

Advertisement

Available languages

Available languages

Cup Shelves
Fold down the extra shelf on the left-hand
or right-hand side of the top rack to hold
additional cups, stemware, or long items
such as utensils and spatulas. For best
results on cups, stagger the spacing so
that the cups on the shelf are not directly
above the cups below.
Fold Down Tines
The row of tines on the left-hand
and right-hand sides of the upper,
or in the back of lower rack can
be adjusted to make room for a
variety of dishes.
To adjust the fold-down tines:
1. Grasp the tip of the tine that
is in the tine holder.
2. Gently push the tine out of
the holder.
3. Lay the tines down, toward
the center of the rack.
EZ Adjust Tines
Sliding lower-rack tines that
move left or right to fit your
dishes. You can use this
feature to fit larger items like
cereal bowls and others.
Silverware Spray
Silverware spray helps
remove stuck-on food. It
delivers a concentrated
shower of water to the in-
the-door silverware basket
to eliminate rewashing.
14
EZ-2-Lift™ Top Rack Adjuster
You can raise or lower the
top rack to fit tall items in
either the top or bottom rack.
Adjusters are located on
each side of the top rack.
To raise the rack:
Lift and pull up.
To lower the rack:
Lift up and let down.
NOTE: The top rack
must be level.
Removable Top Rack
The removable top rack allows you to wash larger items such
as pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack
from dishwasher.
To remove the rack:
1. To gain access to the track
stops, pull the upper rack
forward about halfway out
of the tub.
2. To open, flip the track
stop toward the outside
of the tub.
3. After opening both track
stops, pull top rack out
of the rails.
4. Close track stops and
slide the tracks back
into the dishwasher.
To replace the rack:
1. Gently pull tracks forward in dishwasher until they stop.
Open track stops.
2. Place the back wheels on each side of the rack into the track
slot and roll them back into the tracks, but do not push the
rack all the way into the tub.
3. Insert front rack wheels on each side of the rack into the
track slots.
4. Slide rack into the dishwasher. The stops will automatically
close when rack enters dishwasher.

Advertisement

Chapters

Table of Contents
loading

Table of Contents