Advertisement
KS-FX201
Pinch-roller (R) assembly
Shaft
Remove the P arm spring (r)
from the chassis.
Removing the playback head (See Fig.2)
Prior to performing the following procedure, remove
the direction switch board and the FF / REW lever
assembly.
1.
Remove the screw D attaching the playback head.
2.
Remove the C washer and pull out the FF roller.
3.
Remove the S support plate, the A arm spring (a)
and (b), the playback head.
The A arm spring (a) differs from the A
ATTENTION:
arm spring (b).
Removing the pinch-roller (R) and (F)
assembly (See Fig.2)
Prior to performing the following procedure, remove
the direction switch board and the FF / REW lever
assembly.
1.
Remove the P arm spring (f) in the pinch-roller (F)
assembly from the chassis.
2.
Remove the P arm spring (r) in the pinch-roller (R)
assembly from the chassis.
3.
Draw out the pinch roller (F) and (R) assembly from
the shaft.
The P arm spring (f) differs from the P
ATTENTION:
arm spring (r).
The pinch roller (F) assembly differs
ATTENTION:
from the pinch roller (R) assembly.
1-8
S support plate
C washer
A arm spring (b)
FF roller
P arm spring (r)
Pinch-roller (F) assembly
D
A arm spring (a)
Playback head
Remove the P arm spring (f)
from the chassis.
P arm spring (f)
Fig.2
Shaft
Advertisement
