Something Not Working - AEG LAVATHERM 35600 Operating And Installation Instructions

Something not working?

Something not working?
If the tumble dryer is not working correctly please carry out the follow-
ing checks before calling an engineer.
The tumble dryer will not start
The results are unsatisfactory
The drying process takes
unusually long
The door cannot be closed
30
Symptom Possible cause
The appliance is not
plugged in
The fuse has blown
The STARTbutton has not
been pressed
No program has been
selected
The door is not properly
closed
The wrong program has
been selected
Fluff filter blocked
The tumble dryer has
been overloaded
Laundry not sufficiently
spun prior to tumble
drying
A residue may have
formed on the drum
interior, blocking the
sensors
The vent hose may be
obstructed
Fluff filter is clogged
Fluff filter has not been
inserted correctly and/or
the filter lid not closed
Solution
Plug in the appliance
Check the fuse
Press the START button
Select the required
program
Close the door
Select a different
program
Clean the fluff filter
Observe the maximum
loads stated for each
program
Ensure the wash load is
well spun before tumble
drying
Clean the inside of the
drum with white vinegar
Check the vent is not
blocked or squashed
Clean the fluff filter
Replace the fluff filter
and ensure the filter lid is
closed