Canon MG3000 series Online Manual page 83

Flashes:
Printing or scanning over wireless LAN. Also flashes while configuring the wireless LAN
connection.
Note
• If this lamp is off, the printer is not connected to the wireless router. In addition to enabling wireless
LAN, check the network environment.
(5) Network lamp
Lights when the wireless LAN is enabled.
(6) Direct lamp
Lights when Wireless Direct is enabled.
(7) Alarm lamp
Lights or flashes when an error occurs. When performing printer maintenance or printer settings,
options can be selected according to the number of flashes.
(8) ink lamps
Light or flash when ink runs out, etc.
The upper lamp indicates the black FINE cartridge status, the lower lamp the color FINE cartridge
status.
(9) Stop button
Cancels operations. You can press this button to cancel a print, copy, or scan job in progress. Holding
this button down lets you select maintenance options or printer settings.
(10) Black button*
Starts black & white copying. You can also press this button to finalize your selection for the setting
item.
(11) Color button*
Starts color copying. You can also press this button to finalize your selection for the setting item.
* In the software applications or manuals, the Color and Black buttons are collectively called the "Start" or
"OK" button.
83