Troubleshooting/Cautions - JVC Everio GZ-R315BE Basic User's Manual

Troubleshooting/Cautions

Troubleshooting
If you encounter problems with this unit,
check the following before requesting
service.
1. Refer to the "Troubleshooting"
section in the "Detailed User Guide".
If you have difficulties operating the
unit, refer to the detailed
descriptions in the "Detailed User
Guide".
http://manual3.jvckenwood.com/
index.html/
2. This unit is a microcomputer-
controlled device. Electrostatic
discharge, external noise and
interference (from a TV, a radio, etc.)
might prevent it from functioning
properly.
In such a case, reset the unit.
A Remove all the cables from this
unit.
B Press the "Reset button" located
inside of the terminal cover.
(Before pressing the reset button,
close the LCD monitor to turn off
this unit.)
C Reattach the AC adapter, open
the LCD monitor and this unit
powers on automatically.
3. If the above do not solve the problem,
consult your nearest JVC dealer or
JVC service center.
Built-in Battery
This unit is equipped with a built-in lithium-
ion battery. Before using this Unit, be sure
to read the following cautions:
To avoid hazards
0
do not burn.
...
do not modify or disassemble.
...
do not expose this Unit to temperatures
...
exceeding 60 °C, as this may cause the
built-in battery to overheat, explode or
catch fire.
To prevent damage and prolong
0
service life
do not subject to unnecessary shock.
...
charge within the temperature range of
...
10°C to 35°C. Cooler temperatures
require longer charging time, or in some
cases stop charging at all.
Warmer temperatures prevent complete
charging, or in some cases stop
charging at all.
store in a cool, dry place. Extended
...
exposure to high temperatures will
increase natural discharge and shorten
service life.
keep a 30% battery level (i) if the
...
battery is not to be used for a long period
of time.
In addition, fully charge and then fully
discharge the battery every 6 months,
then continue to store it at a 30% battery
level (i).
remove the AC adapter from the unit
...
when not in use, as some machines use
current even when switched off.
do not drop intentionally or subject to
...
strong impact.
Recording Medium
Be sure to follow the guidelines
0
below to prevent corruption or
damage to your recorded data.
Do not bend or drop the recording
0
medium, or subject it to strong
pressure, jolts or vibrations.
Do not splash the recording medium
0
with water.
Do not use, replace, or store the
0
recording medium in locations that are
exposed to strong static electricity or
electrical noise.
Do not turn off the camcorder power
0
during shooting, playback, or when
otherwise accessing the recording
medium.
Do not bring the recording medium
0
near objects that have a strong
EN
15