Canon iPF785 User Manual page 467

iPF785
System
Reset PaprSetngs
Setup
Erase High Speed
HDD Da-
ta
Secure High Spd.
Secure
Output Print
Method
Print (Auto Del)
Save: Box XX
Print After Recv
Save: Common Box
Show Job Log
Prep.MovePrinter
Admin. Change Password
Menu
Init.Admin.Pswd
User's Guide
Setting Item Description, Instructions
Restores settings that you have changed with Media Con-
figuration Tool to the default values.
Erases file management data for print job data stored on
the printer's hard disk. (See "Erasing Data on the Printer's
Hard Disk.")
P.485
➔
Overwrites the entire hard disk with random data. (See
"Erasing Data on the Printer's Hard Disk.")
Overwrites the entire hard disk with 00, FF, and random da-
ta (one time each). Verification is performed to check if the
data was correctly written. (See "Erasing Data on the Print-
er's Hard Disk.")
P.485
➔
Select the printing method for jobs received from software
other than the printer driver. When using the printer driver,
configure settings on the printer.
To print as usual, select Print. Selecting Print (Auto Del)
will print the job and then delete the data from the printer's
hard disk. Selecting Save: Box 01 will only save the print
job in the box, without printing it.
A setting for jobs received from software other than the
printer driver. When using the printer driver, configure set-
tings on the printer. Select On to print the job after it has
been saved.
Select Off to print without saving jobs in the common box.
Selecting Off prevents display of the log in Job Menu >
Job Log. Additionally, the log is not printed if you choose
Job Menu > Print Job Log. Note that because job logs are
not collected, the Status Monitor accounting functions will
not work correctly.
When transferring the printer to another location, choose
the level of transfer and follow the instructions on the
screen. (See "Preparing to Transfer the Printer.")
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
The password that can be entered is a number from 0 to
9999999.
The restriction states and main items are shown below. For
more specific information on restricted items, see "Menu
Structure."
P.450
➔
• Viewing and configuration by administrators only
Change Password
Init.Admin.Pswd
Etc.
• Viewing and configuration by administrators, and only
viewing by other users
Date & Time
Time Zone
Use RemoteUI
Etc.
Choose OK to restore the Admin. Menu password to the
default values.
Menu Settings
P.485
➔
P.616
➔
467