Configuring Binding (Excel) - Canon iPF785 User Manual

Configuring Binding (Excel)

12
If the upper and lower margins are too wide, check No Spaces at Top or Bottom (Conserve Paper).
The upper and lower margins can be checked in Print Preview.
Note
13
Press Print to start printing.
Important

Configuring Binding (Excel)

Configuring Binding (Excel)
You can configure Binding margins for binding printouts.
1
Configure the settings up to Layout Selection in the Layout screen in Print Entire Sheet or Print Selected
Area.
Refer to "Print Entire Sheet(Excel)"
methods.
2
Click the Binding Settings button.
Important
Open the Binding Settings dialog box.
3
If the Binding checkbox is not checked, select it to turn binding on.
4
Select Binding Edge.
5
Select Binding Margin.
274
• When Print in Draft mode is selected, printing is fast but the print quality is poor.
• When Saturation is selected, you can print posters, etc., vividly.
• Press the Print Preview button to display the preview screen. You can check and make changes to the layout
in the preview screen.
• When you print to the edge of the roll width, the maximum print length is 18.0m.
• If divided into plural pages, try reducing the data size or the range you select.
• You cannot run Print or Print Preview if you select it for a worksheet with no data displayed.
➔
• You cannot click the Binding Settings button in the following situations.
• When the Image Size is set to a value smaller than 100%
• When a graph is selected
• When page breaks have been set
When a sheet or cell is protected
•
and "Print Selected Area(Excel)"
P.269
for the configuration
P.271
➔
User's Guide
iPF785