For Wired Network Interface Users (Dcp-7045N Only); For Mac Os X 10.2.4 Or Greater - Brother DCP-7030 Quick Setup Manual

STEP 2
Installing the Driver & Software

For Wired Network Interface Users (DCP-7045N only)

4

For Mac OS X 10.2.4 or greater

Important
Make sure that you have finished the
instructions from step 1 Setting Up the
Machine on pages 8 through 11.
1
Plug the AC power cord into an AC outlet. Turn
the power switch on.
2
Connect the network interface cable to the
machine, and then connect it to your network.
3
Turn on your Macintosh.
4
Put the supplied CD-ROM for Macintosh into
your CD-ROM drive.
22
5
Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Note
• Please see the Network User's Guide on the CD-
ROM to install the PS driver.
• Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
Macintosh