Help Guide
Troubleshooting
Personal Audio System
SRS-X2
Initializing the speaker
With the speaker turned on, while holding the VOL (volume) - button, press and hold the
seconds, so as to turn the speaker off.
The speaker is initialized. Settings such as volume, etc., are restored to the factory default settings, and all pairing
information is deleted.
Note
To turn on the speaker after initializing it, connect the speaker to an AC outlet via the USB AC adaptor. If the speaker
is being powered by the built-in battery, it cannot be turned on.
Notes on use
4-540-810-11(1)
Copyright 2014 Sony Corporation
(power) button for 5
88
Need help?
Do you have a question about the SRS-X2 and is the answer not in the manual?
Questions and answers