Epson PowerLite 1224 User Manual page 162

Power light Status light
Off Flashing blue
Flashing blue Light status
varies
Off Flashing blue
Off Flashing blue
Off Flashing blue
Off Flashing blue
Light status Light status
varies varies
Lamp light Temp light
Orange Off
Flashing Light status
orange varies
Off Flashing
orange
Flashing Off
orange
Flashing Flashing
orange orange
Orange Orange
Flashing Flashing
orange rapidly orange rapidly
162
Status and solution
Lamp has a problem.
• Check to see if the lamp is
burned out, broken, or installed
incorrectly. Reseat or replace the
lamp as necessary.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug
the projector and contact Epson
for help.
Replace the lamp soon to avoid
damage. Do not continue using the
projector.
A fan or sensor has a problem.
Turn the projector off, unplug it, and
contact Epson for help.
Internal projector error. Turn the
projector off, unplug it, and contact
Epson for help.
Auto iris error. Turn the projector
off, unplug it, and contact Epson for
help.
Power error. Turn the projector off,
unplug it, and contact Epson for
help.
When transferring settings between
projectors, the settings file may be
corrupt or the USB flash drive or
USB cable may not be properly
connected. Remove the flash drive
or cable, unplug the power cord,
and try again.