Table of Contents
Advertisement
8.
Attach each of the four black screws with rubber head assembly
into the screw holes of the HDD as shown.
9. Position the Serial ATA HDD on top of the drive bay to an
orientation where the HDD's SATA connectors are aligned to the
SATA connector in the VivoPC drive bay.
10. Match the rubber heads with the four screw slots on the drive
bay.
11. Carefully, place the Serial ATA HDD into the drive bay, then slide
the drive towards the SATA connector.
SATA connector
Rubber head
Screw slot
VivoPC Barebone
36
Black screw
Rubber head
Advertisement
Table of Contents
