8.
Slide the top cover of the Vivo DualBay adapter towards the
rear, then remove the top cover and set it aside.
9. Prepare a 2.5-inch HDD/SSD and the bundled set of screws.
10. Align the SATA connector of the 2.5-inch HDD/SSD to the SATA
connector on the lower part of the Vivo DualBay adapter, then
slide the 2.5-inch HDD/SSD into the adapter's SATA connector
as shown.
SATA connector (lower port
on Vivo DualBay adapter)
SATA connector (HDD/SSD)
Vivo DualBay adapter
2.5-inch HDD/SSD
VivoPC Barebone
29