Toshiba RBC-AX32U(W)-E Owner's Manual page 7

8
(COMFORT SLEEP) display
Indicated during the OFF timer operation that
automatically adjusts the room temperature and the
fan speed. Each time you push the COMFORT
SLEEP button, the display changes in the sequence
of 1h, 3h, 5h, and 9h.
9
(QUIET) display
Indicated during the quiet operation.
Signal receiving unit
The signal receiving unit is attached to the indoor unit.
1
2
3
1
Temporary operation button
(See page 13)
2
Signal receiving part
The signal sent from the remote controller is
received.
3
Display lamp
One of displays flashed while an error occurs. When
the display lamp flashes, refer to "Before asking for
repair work".
4
lamp (Green)
This lamp illuminates when unit is on.
5
lamp (Green)
This lamp illuminates while the timer is reserved.
6
lamp (Orange)
• In heating operation this lamp illuminates in the
following cases;
The operation has started.
The temp. controller has worked.
The unit is under defrost operation.
• This lamp flashes while a trouble occurs.
10
Swing display
Indicated during the swinging operation where the
horizontal louver automatically moves up and down.
NOTE
When both wired remote controller or central controller
and wireless remote controller are used, display on the
screen of wireless remote controller may differ from the
actual operation in some cases.
CAUTION
Disagreement in operation mode
4 • If "pi, pi" sound is heard, the display lamp goes on,
and the lamp and
5
operation is not performed with the desired mode.
• Even if you push START/STOP, MODE,
6
TEMPERATURE buttons when remote controller
operation is disabled by the central control or other
means, "pi" is heard 5 times and the button operation
is not accepted.
– 6 –
lamp flash alternately, the
EN
6-EN