Casio CTK-4400 User Manual page 54

Recording Your Keyboard Play
To record to Tracks 1 through 6
1.
Record the first part to Track 1.
To record to Track 1, perform steps 1 through 4 under
"Recording and Playing Back Keyboard Play" (page
EN-50).
Lights
2.
cs
Press .
This will enter record standby.
Flashes
3.
Press a button from
number of the next track to which you want to
record.
This will enter record standby for the track you selected.
Example: Track 2
Flashes
• If you want to use a different tone than the one you
used in Track 1, press
(10-key) to input the tone number.
4.
Press bk .
This will start playback of what you recorded up to this
point in other tracks and record what you play on the
keyboard to the currently selected track. Play the notes
you want on the keyboard.
EN-52
bt to cn to select the track
bn
(TONE) and then use
5.
To stop recording, press
• To play back what you have recorded, press
Each press of
6.
Repeat steps 2 through 5 to record the other
tracks.
7.
After you finish recording all of the tracks,
press bk
• This will start playback of the recorded tracks. Press
bk
to stop or restart playback.
• At this time you can turn off playback of specific tracks
using buttons
playback of each track on (track number displayed) or
off (track number not displayed).
• If you want to re-record a track, press
return to step 2 of the above procedure. Only the tracks
that are turned on (displayed) above will play as you
re-record.
Example: Tracks 2 and 3 selected
8.
Press cs
br
■ To delete a recorded track
After step 3 of the above procedure, do hold down
(without pressing any keyboard key) until the message
"Tr.Del?" appears on the display. Press [+] (YES) to delete the
track, or [–] (NO) to cancel the delete operation.
bk .
bk
starts and stops playback.
.
bs to cn . Pressing a key toggles
Disappears
twice to exit the recorder mode.
Disappears
bk
again.
cs
. This will
cs