LG HR922S Owner's Manual page 16

16
Connecting
4. Select an item using W/S. If you know the
programmed [LNB Frequency], [22kHz Tone],
[DiSEqC], [LNB Power], [Transponder] and
[Motor], use A/D to select the desired.
If you select [DiSEqC 1.2], you can set Motor
Driving Mode, Motor Move and Set Limit,
and if you select [USALS], you can set the
longitude and latitude and use S to select
[Go to position]; then motor will move to your
selelected satellite as calculating its position.
2
,
Note
If you use USALS, you should know lines of
longitude and latitude at your location.
5. Use W/S to select the [Save] and press ENTER
(b) to display the [Saved List] menu.
,
Note
If there isn't LNB Frequency what you want in
[LNB Frequency], input LNB Frequency with
numerical buttons.
6. Use W/S/A/D to select the [Go To Tuning]
and press ENTER (b).
7. Select [Start] and press ENTER (b) to begin the
channel search.
Use W/S to select a satellite check box and
press ENTER (b) to select or deselect it.
You can search All, FREE, CAS channels
individually. Press W, you can select Search Type
with A/D.
[All]
All channels the satellite searches.
[FREE]
Free of charge channels.
[CAS](Conditional Access System)
Pay channels.
Select [Stop] and press ENTER (b) to stop the
channel search.
8. Press ENTER ( ).
,
Note
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
Auto Tuning
All available satellite TV or radio programmes are
searched.
1. Use W/S to select the [Auto Tuning] and
press ENTER (b).
2. Follow the steps 7-8 from "Antenna Setting" on
page 15-16.