14
Connecting
Connections to Your
TV
Make one of the following connections, depending
on the capabilities of your existing equipment.
y Satellite Antenna connection (page 14)
y HDMI connection (page 14-15)
2
y Component Video connection (page 17)
y Composite connection (page 18)
,
Note
y Depending on your TV and other equipment
you wish to connect, there are various ways
you could connect the unit. Use only one of
the connections described in this manual.
y Please refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
y Make sure the player is connected directly
to the TV. Tune the TV to the correct video
input channel.
y Do not connect the player's AUDIO OUT jack
to the phono in jack (record player) of your
audio system.
y Do not connect your player via your VCR.
The image could be distorted by the copy
protection system.
Satellite Antenna connection
Connect the Satellite antenna to the RF ANTENNA
IN jack on the unit.
Satellite antenna
Satellite antenna
HDMI Connection
If you have a HDMI TV or monitor, you can connect
it to this unit using a HDMI cable (Type A, High
Speed HDMI™ Cable). Connect the HDMI jack on
the unit to the HDMI jack on a HDMI compatible TV
or monitor.
HDMI Cable
Set the TV's source to HDMI (refer to TV's Owner's
manual).
Rear of this unit
Rear of this unit
Rear of this unit
TV
TV