Brother MFC-J220 Basic User's Manual page 79

Printing (continued)
Difficulty
Stains appear on the reverse side
or at the bottom of the page.
The machine prints dense lines on
the page.
The printouts are wrinkled.
Cannot perform "Page Layout"
printing.
Print speed is too slow.
®
True2Life is not working properly.
Photo paper does not feed
properly.
Machine feeds multiple pages.
There is a paper jam.
Printed pages are not stacked
neatly.
Machine does not print from
® ®
Adobe Illustrator .
Suggestions
Make sure the printer platen is not dirty with ink. (See Cleaning the machine's
printer platen in appendix A in the Advanced User's Guide.)
Make sure you are using Genuine Brother Innobella™ Ink.
Make sure you are using the paper support flap.
(See Loading paper and other print media on page 9.)
Check Reverse Order in the Basic tab of the printer driver.
In the printer driver Advanced tab, click Color Settings, and uncheck
Bi-Directional Printing for Windows
Make sure you are using Genuine Brother Innobella™ Ink.
Check that the paper size setting in the application and in the printer driver are the
same.
Try changing the printer driver setting. The highest resolution needs longer data
processing, sending and printing time. Try the other quality settings in the printer
driver Advanced tab. Also, click Color Settings, and make sure you uncheck
Color Enhancement (True2Life
Turn the borderless feature off. Borderless printing is slower than normal printing.
®
(See Printing for Windows
User's Guide.)
If the image data is not full color in your application (such as 256 color), True2Life
will not work. Use at least 24 bit color data with the True2Life
When you print on Brother Photo paper, load one extra sheet of the same photo
paper in the paper tray. An extra sheet has been included in the paper package
for this purpose.
Clean the paper pick-up rollers. (See Cleaning the paper pick-up rollers in
appendix A in the Advanced User's Guide.)
Make sure the paper is loaded properly in the paper tray. (See Loading paper and
other print media on page 9.)
Check that more than two types of paper are not loaded in the paper tray at any
one time.
Make sure the paper length guide is set to the correct paper size. Do not extend
the paper tray when you load A5 or smaller size paper. (See Printer jam or paper
jam on page 61.)
Make sure you are using the paper support flap.
(See Loading paper and other print media on page 9.)
Try to reduce the print resolution. (See Printing for Windows
Faxing for Macintosh in the Software User's Guide.)
®
or Bi-Directional Printing for Macintosh.
®
).
or Printing and Faxing for Macintosh in the Software
Troubleshooting
®
®
feature.
B
®
or Printing and
65