Mp3 Player; Create Mp3 Fi Les - Philips HTS6543 User Manual

2
Press RADIO .
» If you have already installed the radio
stations, the last channel that you listened
to is played.
» If you have not installed any radio
stations, the message AUTO
INSTALL...PRESS PLAY appears on
the display panel. press
3
Use the remote control to listen or to
change radio stations.
Button Action
Numeric
Select a preset radio station.
buttons ,
/
Navigation Left/Right: Search for a radio
buttons
station.
Up/Down: Fine tune a radio
frequency.
Press to stop the installation of
radio stations.
Press and hold to erase the
preset radio station.
PROGRAM Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.

MP3 player

Connect a MP3 player to play audio fi les.
What you need
•
An MP3 player.
•
A 3.5mm stereo audio cable.
1
Connect the MP3 player to the MUSIC
iLINK connector on your home theater.
2
Press SOURCE repeatedly until MUSIC
I-LINK appears on the display panel.
3
Press the buttons on the MP3 player to select
and play audio fi les.
14 EN
.
Create MP3 fi les
Use your home theater to convert audio CDs into
MP3 fi les.
What you need
•
An audio disc.
•
A USB storage device.
1
Connect a USB storage device to your home
theater.
2
Play your audio CD (CDDA).
3
Press CREATE MP3 .
» A confi rmation message is displayed.
4
Select [Yes] , and then press OK .
» The create MP3 screen is displayed. The
right panel contains MP3 settings and the
left panel shows the audio tracks.
CREATE MP3
OPTIONS
Speed Normal
Bitrate 128kbps
CRT ID3 Yes
Device USB1
SUMMARY
Select Track 0
Time 00:00
Start Exit
5
Press the Navigation buttons and OK to
select and change:
• [Speed] : Select the write-to-fi le speed.
•
[Bitrate] : Select the conversion quality.
•
[CRT ID3] : Copy the tracks information
when converting to MP3 fi les.
•
[Device] : Select the USB storage device
which you use to store the MP3 fi les.
6
Navigate to the right panel, select the audio
tracks and press OK .
• To select all tracks, navigate to [Select
All] , and then press OK .
7
Select [Start] and then press OK to start the
MP3 conversion.
» A new folder which contains the MP3
fi les is created in the USB storage device.
•
To exit the menu, select [Exit] , and then
press OK .
TRACK
Track01 04:14
Track02 04:17
Track03 03:58
Track04 04:51
Track05 03:53
Track06 04:09
Track07 04:38
Select All Deselect All