Table of Contents
Advertisement
Dubbing
Digital input/output
You can perform dubbing with a high image quality
by means of digital signals by using a 1394 cable
to connect this unit to a digital video unit equipped
with a 1394 connector.
1
Connect the digital video equipment to this
unit. (Page 8)
Press the unit's mode button to switch to
the MCR mode.
MODE
•
Cancel the thumbnail screen when in MCR
mode.
•
Set up the connected equipment for playback
or recording.
•
When performing digital dubbing with a
second camera-recorder or other device, a
recording cannot be made unless the signal
formats at the output side and input side are
identical.
•
When using with the 720P/25PN
(720P/24PN and 720P/30PN) settings, digital
output in MCR mode only is performed.
Digital input is not possible.
3
Start playing back in the player.
Start recording in the recorder.
•
If you are using this unit as the recorder,
press the two REC buttons (ZEBRA and
OIS) at the same time. On the remote control
unit, press the PLAY button while holding
down the REC button.
OFF
OFF
INPUT2
MIC POWER+48V
AUDIO
REC
COUNTER
RESET/TC SET
ZEBRA
OIS
LCD
EVF DTL
WFM
Camera or Remote control
5
Stop recording in the recorder.
•
If the unit is used as the recorder, push the
Operation lever to the g (stop) direction.
6
Stop playback on the other unit.
•
If the unit is used as the player, push the
Operation lever to the g (stop) direction.
CAM
MCR
PC
COUNTER RESET
TITLE
ZOOM
MULTI/
P-IN-P
REC
A.DUB
/REW
PLAY
FF/
STILL ADV PAUSE STILL ADV
•
The DV format is converted into 48K/2CH or
4CH. In the case of 1080i and 720P, channels
1 to 4 are recorded directly, and channels 5 to
8 are not recorded.
•
If you have set 1394 TC REGEN or 1394
UB REGEN to on in the recording unit's
menus you can copy the time code and
user information from the playback source.
(Page 108)
Do not start recording until you can see
the images on the recording unit's screen.
Time code and user information may not
be correctly recorded if you start recording
before the images are received.
Analog output
You can record images you have shot on this unit
to an S-VHS (VHS) tape in a video deck.
1
Connect the video recording device to the
unit. (Page 83)
Press the mode button to switch to the
MCR mode.
MODE
3
Set the unit to playback.
Start the recording by operating the video
recording device.
When video recording is completed, stop the video
recording device.
To stop playback, push the Operation lever to the
g (stop) direction.
ENGLISH
CAM
MCR
PC
E-89
Advertisement
Table of Contents
