•
Use two P2 cards each with a recording
capacity of more than one minute. Recording
stops when either card is ejected.
•
This function does not work during 1394
input recording.
•
The pre-recording function does not work.
•
Operation is not possible even if only one of
the inserted cards is DIR ENTRY NG CARD.
(Page 94)
•
Stopping may take some time.
•
The following operations are not
acknowledged until the P2 card access
lamps change from blinking to fully lit up.
•
The slots for recording in this mode are
indicated by the orange P2 card access
lamps.
•
Text memos cannot be added.
ENGLISH
E-51