Kenwood CK 300 FFD Instructions For Use Manual page 38

Fig. 10.6
Fig. 10.8
38
LEFT OVEN
OVEN BURNER AND GRILL BURNER
REPLACEMENT OF INJECTORS
a) oven burner
– Lift and remove the lower panel inside
– Remove the burner securing screw
– Withdraw the burner as shown in fig-
– Using a 7 mm box spanner, unscrew
Fig. 10.7
b) grill burner
– Remove the burner by unscrewing the
– Using a 7 mm box spanner, replace
– Replace the burner repeating the
Fig. 10.9
the oven.
(fig. 10.6).
ure 10.7 and rest it inside the oven.
Take care not to damage the wire to
the ignition electrode and the safety
valve probe.
the injector (indicated by the arrow in
fig. 10.7) and replace it by the proper
one according to the kind of gas.
Then replace the burner repeating the
above steps in reverse order.
front screw (fig. 10.8).
Gently suspend the burner as shown
in figure 10.9. Be careful not to
damage the wire of the electric ignition
and the probe of the safety valve.
the injector (indicated by the arrow in
fig. 10.9) by the proper one according
to the kind of gas.
above steps in reverse order.