Launch X-431 PROS V4.0 User Manual page 34

LAUNCH X-431 PROS V4.0 User Manual
Fig. 5-15
Note: Diagnostic report is classified into three categories: Pre-Repair report,
Post-Repair report and Diagnostic Scan. No matter which type you saved the report as,
the report type will be appended as a tag on the upper right corner of the diagnostic
report for easier identification.
Tap to select the report type from the option list and input the required
information, and then tap "OK".
Alternatively you can also set the workshop information in "User Info" ->
"Settings" -> "Print Information".
Once you configured the information, it will be automatically generated every
time you saved the diagnostic report. All vehicle and workshop information will
be appended to the diagnostic report.
To skip the workshop information, tap "Skip" to go to the next step.
All reports are saved under the tab "Diagnostic Report" in "My Report" from
"User Info" menu. For details on report operations, please refer to Chapter 9.1
"My Report".
27