Summary of Contents for Fanimation Air Shadow FP815FS
Page 1
Fabric Shade Ceiling Fan WARNING: Support Directly From Building Structure Net Weight 13.15 kg (29 lbs) Model No. FP815FS OWNER’S MANUAL READ AND SAVE THESE INSTRUCTIONS For Canada, this fan must be secured directly to the building structure or ceiling joist.
Fanimation. 7. Fanimation reserves the right to modify or discontinue any product at any time and may substitute any part under this warranty. 8. Under no circumstances may a fan be returned without prior authorization from Fanimation. The receipt of purchase must ac- company authorized returns and must be sent freight prepaid to Fanimation.
Fanimation. Substitution of parts or accessories not designated for use with this product by Fanimation could result in personal injury or property damage. Contact your retail store for missing or damaged parts.
Electrical and Structural Requirements Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. The outlet box must be securely anchored and capable of withstanding a load of at least 22.7 kgs (50 lbs). Figure 1 depicts different structural configurations that may be used for mounting the outlet box.
Page 5
How to Assemble Your Ceiling Fan (cont’d) 6. Route wires through opening in Motor Coupling Cover. Position Motor Coupling Cover on fan shown with open side facing down. (Figure 2) 7. Route wires through opening in Canopy. Canopy on fan shown with open side facing up. (Figure 3) 8.
How to Hang Your Ceiling Fan ▲WARNING To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before hanging. NOTE: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice, as it must be grounded for safe operation.
How to Wire Your Ceiling Fan - C28 Remote Control If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. ▲WARNING To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring.
How to Operate Your C28 Remote Control 1. Operating & Using Remote Transmitter (Figure 1): Install 9 volt battery (If not using for long periods of time, remove battery to prevent damage to transmitter). Store the transmitter away from excess heat or humidity. •...
For your own safety turn off power at fuse box or circuit breaker before trouble shooting your fan. Trouble 1. Fuse or circuit breaker blown. 2. Loose power line connections to the fan, or loose switch wire connections in the switch housing. 1.
CAUTION Turning off wall switch is not sufficent. possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and Local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock.
Page 11
Installing the LK815OB (cont’d) Figure 5 5. Install light fixture to adapter with 3 screws provided. Figure 7 7. Install glass bowl, rubber washer, flat washer and two nuts provided, do not over-tighten. Figure 9 9. Install finial nut, do not over-tighten. Figure 6 6.
Before discarding packaging materials, be certain all parts have been removed Contact your retail store for repair parts. When ordering repair parts, always give the following information. Parts List Model #FP815FS Description How To Order Parts • Part Number • Part Description •...