Page 3
Undermount clip (Not including) If you need to use as under please buy a similar screw (BB)
Page 6
Installing the faucet assembly Securing the faucet assembly □ From underneath the sink, secure the faucet CAUTION: Always shut off the water supply before assembly to the sink with the FastMount™ removing an existing faucet or replacing any part of a faucet.
Page 7
Installing the soap dispenser Making the water supply connections □ Insert the soap assembly (G) through the selected hole NOTE: The hot side inlet tube is indicated by a label. Avoid in the sink. Secure the soap assembly to the sink with twisting wires together or placing the wires close to each the soap dispenser mounting nut (H) provided.
Page 9
WARNING When you choose undermount style installation, please do not pull out the installation rail shown as below picture;because the sink surface would be non repairable damaged after rail pull out. Recommend you could have the professional plumber or countertop or cabinet seller to install the sink by undermount style.
Need help?
Do you have a question about the VDR3322A0 and is the answer not in the manual?
Questions and answers