Advertisement
6. Connect the lit spillway to the pump by pushing the plug into the
socket until it is firmly seated. Hand tighten the nut from the plug to
the socket. Fig. 6
7. The planter basket has a drain hole. For indoor use, use the rubber
stopper and insure it is seated properly. Fill it with water to insure
there is no leakage. For outdoor use, do not use the rubber
stopper instead connect the 1/2" ID tube to the adapter. Fig. 7
8. Place the basket on upper section. Note: if the basket connect with
the 1/2" ID tube, it is important to insure that the planter drain tube
is behind the liner of the reservoir to insure that dirt and debris from
the planter do not enter the reservoir. Fig. 8
Socket from
pump
Plug from
lit spillway
Fig. 6
For indoor use
For outdoor use
Fig. 7
Fig. 8
Advertisement
