Changing The Reversible Door - Whirlpool WF1D042 Health & Safety, Use & Care, Installation Manual And Online Warranty Registration Information

Table of Contents

Advertisement

The door of this refrigerator can be changed from the left or right side. Should you desire to reverse the
opening direction, please follow below instructions.
NOTE:
Before reversing the door, the power must be shut off.
All parts removed must be saved for the reinstallation of the door.
1. Remove the upper hinge cover (6)
2. Remove the two screw (1) which hold the upper hinge (5) (right side) to the frame. Take away the
upper hinge.
3. Lift the door and place it on a padded surface to prevent scratching.
4. Remove the two screws (8) that hold the lower hinge (2) and make sure you remove the lower
hinge (2).
5. Remove the left front leg (4) and transfer it to right side.
6. Remove the hole cover plate (7) to the right side.
7. Before placing this lower hinge (2), remove the bold-pin (9) and reverse the direction of the lower
hinge (2). Then install the lower hinge (2) onto the left side of the lower frame with two screws (8).
8. Insert the bolt-pin (9) to the lower hinge (2).
9. Set the door to its place make sure the door seat at the lower hinge (2).
10. While holding the door in the closed position secure the upper hinge (5) in the top frame of left side
with two screws (1). Please remember not to tighten the two screws (1) until the top of the door is
leveled with the counter top.

CHANGING THE REVERSIBLE DOOR

31 |
P a g e

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Wf1d072Wf1d092Wf1d122

Table of Contents