Epson PhotoPC 700 User Manual page 14

Note:
If IAS can't find your camera, follow the
instructions on the screen to establish a
connection.
If you purchased additional copies of software,
continue with step 8. Otherwise, go to step 9.
8. To upload IAS to another camera, disconnect the
first camera and connect the second. Turn the second
camera on, then click Test Connection to make sure
the camera is properly connected. The software
uploads automatically to the second camera.
9. Click Close , then turn off and disconnect your
camera when you're finished.
Any pictures you take with your camera from this point
on can be checked by IAS for authenticity.
Note:
In the unlikely event your camera needs to be
repaired, you will need to upload IAS again.
10