Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HIKOKI G18DBAL
Summary of Contents for HIKOKI G18DBAL
- Page 1 G 18DBL・G 18DBAL G 18DBL G 18DBAL Handling instructions...
- Page 2 c) Prevent unintentional starting. Ensure the GENERAL POWER TOOL SAFETY switch is in the off position before connecting to WARNINGS power source and/or battery pack, picking up or carrying the tool. WARNING Carrying power tools with your fi nger on the switch Read all safety warnings and all instructions.
- Page 3 b) Use power tools only with specifi cally g) Do not use a damaged accessory. Before each use designated battery packs. inspect the accessory such as abrasive wheels for Use of any other battery packs may create a risk of chips and cracks, backing pad for cracks, tear or injury and fi...
- Page 4 toward or away from the operator, depending on direction of ADDITIONAL SAFETY WARNINGS the wheel’s movement at the point of pinching. SPECIFIC FOR ABRASIVE CUTTING- Abrasive wheels may also break under these conditions. Kickback is the result of power tool misuse and/or incorrect OFF OPERATIONS operating procedures or conditions and can be avoided by taking proper precautions as given below.
- Page 5 – Check that the work piece is properly supported; ○ When suspending operation or after use, do not leave – Do not use cutting off wheel for side grinding; the tool in an area where it may be exposed to falling –...
- Page 6 Dangerous Goods and will require special application procedures. ○ For transportation abroad, you must comply with international law and the rules and regulations of the G18DBL / G18DBAL: Cordless Disc Grinder destination country. To reduce the risk of injury, user must read Power Output instruction manual.
- Page 7 125 mm Wheel Hole dia. 22.23 mm Thickness 6 mm Peripheral speed 80 m/s Weight (Only main body) 2.4 kg NOTE Due to HiKOKI’s continuing program of research and development, the specifi cations herein are subject to change without prior notice.
- Page 8 Table 1-a Indications of the pilot lamp Lights for 0.5 seconds. Does not light for 0.5 Before Blinks (red) seconds. (off for 0.5 seconds) charging Lights continuously While charging Lights (red) Lights for 0.5 seconds. Does not light for 0.5 Charging The pilot Blinks (red)
- Page 9 ● Regarding the temperatures and charging time of the battery. The temperatures and charging time will become as shown in Table 2-a (UC18YFSL), Table 2-b (UC18YSL3) Table 2-a Charger UC18YFSL Type of battery Li-ion Temperatures at which the 0°C – 50°C battery can be recharged Charging voltage 14.4...
- Page 10 Mode, the Auto Mode display lamp will remain lit. ○ With Auto Mode, you can lower noise and vibration by Important notice on the batteries for the HiKOKI lowering the maximum number of revolutions while in a cordless power tools no-load state.
- Page 11 G18DBL, G18DBAL (NN) ― BSL1860 BSL36A18 ― UC18YSL3 UC18YFSL ― ―...
- Page 12 〈 UC18YFSL 〉 〈 UC18YSL3 〉...
- Page 14 15° – 30°...
- Page 16 313766 336865 938332Z 937817Z 332788 316822 (A36Q) 18 V (Li-ion) 329897 994324 BSL36A18 UC18YFSL UC18YSL3 (14.4 V – 18 V) (14.4V – 18V)
- Page 20 Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo, Japan Code No. C99711914 G Printed in China...
Need help?
Do you have a question about the G18DBAL and is the answer not in the manual?
Questions and answers