Table of Contents
Advertisement
ID Copy
You can make one-sided and double-sided
copies of identification cards.
Double-sided ID copy can copy both sides of
your identification card onto one page,
keeping the original card size.
The result of the double-sided ID copy is
shown below.
NOTE
• You can copy an identification card to the
extent permitted under applicable laws.
(See Product Safety Guide.)
• For the ID Copy Settings,
(For MFC models) See 3.Copy
on page 31.
(For DCP models) See 2.Copy
on page 43.
Double-sided ID copy
a
(For MFC models)
Press Menu, 3, 4 and go to step c.
(For DCP models)
Press Menu and then press a or b to
choose 2.Copy.
Press OK.
b
Press a or b to choose 4.ID Copy.
Press OK.
c
Press a or b to choose 4.2in1/1in1.
Press OK.
Press a or b to choose 2in1 for double-
sided copy as a default.
Press OK and then press Stop/Exit.
d
(For MFC models)
Press COPY.
9
e
(For MFC models)
Enter the number of copies you want.
(For DCP models)
Press a or b to enter the number of
copies you want.
f
(For MFC models, DCP-1600E and
DCP-1602(E))
Press 2 in 1 (ID) Copy.
(For DCP-1610W(E) and DCP-1612W)
Press 2 in 1 (ID) Copy/Copy Options.
Press a or b to choose Double-sided
ID.
g
Place your identification card face down
as shown, towards the top left of the
scanner glass. Make sure the
identification card is at least 4 mm from
the edges of the glass (1).
9
1
1
4 mm or greater (top, left)
Making copies
9
75
Advertisement
Table of Contents
